How To Create Your Own DIY Interior Basement Drainage System

DIY Interior Basement Drainage System

You might wonder how to create your own DIY interior basement drainage system. In the article, learn about the benefits of a DIY interior basement drainage system and what should be considered when creating an entire plan for a new one.

DIY Interior Basement Drainage System
DIY Interior Basement Drainage System

Let’s Dive In!!!

Why is an interior basement drainage system important?

An interior basement drainage system is important for a number of reasons. Not only does it help to keep your basement dry, but it can also help to prevent flooding in the event of a heavy rainstorm.

In addition, an efficient interior drainage system can also help to keep your home’s air conditioning systems running smoothly. By installing an interior drainage system, you can ensure that your basement is always clean and safe.

How to create a DIY interior basement drainage system

Basement flooding is a common issue for homeowners, and it can be especially dangerous if the water gets stuck in your basement. A drainage system can help keep your basement safe and dry in the event of a flood.

There are a few different ways to create your own DIY interior basement drainage system, and each has its own benefits and drawbacks.

One option is to use an underground trench to collect rainwater runoff from your roof and funnel it down into a larger drainage canal. This setup is effective but can be expensive to install. Another option is to install a series of underground pipes that run along the floor of your basement.

These pipes can connect to larger drains or culverts outside your home, allowing rainwater to flow directly into the sewer system.

whichever method you choose, make sure to consult with a professional before starting construction. They will be able to give you advice on the best way to design and install your drainage system, based on the layout of your home and the type of soil beneath it.

When can you place a DIY interior basement drainage system?

When you have a basement full of dirt, straw, and rubble from years of neglect, it’s time to get your hands dirty and start the process of restoring it to its former glory. One of the first things you’ll need is a drainage system for your interior basement.

This can be as simple as installing some PVC pipe and fittings to run water from outside to inside, or it could involve hiring a professional contractor to build you an elaborate system capable of carrying water away quickly and efficiently.

The key thing to remember when designing your own interior basement drainage system is that you need to account for any existing infrastructure – such as walls, floors, and ceilings – in order to ensure that the system will fit neatly into the space.

You also want to make sure that the drainage system is able to cope with heavy rains or snow melt, so choose a design that incorporates features like large openings or elevated sections that can drain water away quickly.

Once you’ve decided on the design and layout of your interior basement drainage system, it’s time to get started on installing everything yourself.

Start by marking out where you’ll need the pipes and fittings, then start digging the trenches needed for them. Once all the pipes and fittings are in place, screw them into place using bolts and washers provided with the kit.

Finally, cover everything up with concrete or mud bricks if necessary so that no one can see what you’re doing!

What materials will you need for your project?

In order to build your own DIY interior basement drainage system, you will need the following materials:

-Tape measure
-Pipe cutter
-Hole saw
-Tape measurer’s gauge
-Ruler or a straight edge
-Cordless drill with a bit size of 1/4 inch
-Jigsaw or a chop saw
-Stiles (if using PVC pipe)
-Pipe clamps
-Cement mix (optional)
-Water hose with a shutoff valve (if using PVC pipe)

What do I have to know about my plumbing before starting this project?

If you are considering creating your own interior basement drainage system, there are a few things you will need to know.

First, your basement is likely damp and wet, which can lead to mold and other problems. Second, your home’s plumbing may not be able to handle the increased water pressure that a drainage system would require.

Finally, make sure to consult with a professional before starting this project – they will be able to help you figure out what is necessary and recommend the best way to go about it.

How long will the project take?

Your basement can be a great place to store your belongings, but it can also be a breeding ground for water damage. If you’re looking to protect your belongings and keep the basement dry, you’ll need to install a drainage system.

Here’s how to create your own DIY interior drainage system:

1. Measure the length, width, and depth of the area that will be used for the drainage system. This information will help you choose the right size pipes and fittings.

2. Buy all the necessary materials, including PVC pipe, fittings, caps, and traps. You’ll also need a bucket or container for collecting water runoff.

3. Assemble the PVC pipes and fittings according to the diagram provided. Make sure that all of the joints are tight before installing them in the wall or floor joists.

4. Place caps on each end of the pipes and fit them over openings in the floor or walls. Then attach traps to each cap using screws or nails.


How do you waterproof a basement from the inside?

Basements can be a difficult place to waterproof, as they are usually enclosed and have no natural means of drainage.

However, by following these simple steps, you can create your own DIY interior drainage system that will keep your basement dry and safe from water damage.

1. Choose the right materials

To waterproof a basement from the inside, you’ll need to use materials that will both protect the walls and allow for drainage. The best option is a flexible membrane material known as polyurethane foam insulation. This type of insulation is both tough and lightweight, making it effective at protecting the walls while allowing water to escape.

You’ll also need metal flashing, which is a sheet of metal that forms an exterior barrier around pipes or other openings. Together, these materials will help protect the walls and prevent moisture from building up in the basement.

2. Install the barriers

Before installing any barriers, it’s important to gather all of the necessary information. This includes knowing where each pipe or opening is located in the basement wall and what type of material will be used to protect them (e.g., metal flashing or polyurethane foam).

Once this information is gathered, it’s time to install the barriers! Start by tracing each pipe or opening on the outside of the barrier material with a marker before cutting out the shape with a saw.

Then, attach the barrier material to the wall using screws or nails, ensuring that all openings are properly covered.

Finally, paint or seal the barrier material to prevent water damage.

3. Install the drains

Now that the barriers are in place, it’s time to install the drains. This step is important because it will allow water to escape while preventing moisture from building up in the basement. Start by drilling a hole in the bottom of each pipe and installing a drain tube.

Next, connect the drain tubes to a suitable outlet (e.g., a storm drain), and then paint or seal the pipes and fittings.

Finally, test the system by filling up the drain tubes with water and watching as it flows out through the outlets. If everything looks okay, you’re ready to finish waterproofing your basement!

4. Finish the job

Once the system is working properly, it’s time to finish the job. This includes painting or sealant over any exposed surfaces, and installing any lights, fans or other necessary fixtures. You’re now ready to enjoy your dry and safe basement!

If you’re experiencing water problems in your basement, don’t wait to call a professional. Our team can inspect the area and provide you with a complete estimate for repairing or waterproofing the basement.

What is the cheapest way to waterproof a basement?

There are many ways to waterproof a basement, but the cheapest way is to use an exterior drain. This is a trench that runs from the street or driveway up to the house, and then branches off in different directions. The water will run down the trench and away from the house.

You can create your own exterior drain by digging a small hole in the ground and pouring a concrete slab on top. Then, put down a layer of gravel, followed by layers of tar paper and roofing felt. Finish with a layer of soil and you’re ready to go!

Another option is to use a waterproofing membrane. This is a sheet of material that you put over the exterior walls and floor of the basement. It will protect the surface from water and weather damage, and it will also keep moisture out. You can buy waterproofing membranes in rolls or sheets, and you can install them yourself or have a professional do it.

Both of these options will cost you money, but they are the cheapest ways to waterproof a basement.


If you’re like most homeowners, you have a basement that’s just begging to be turned into a useful space. But before you can do anything, you need to make sure your basement is properly equipped with all the necessary drainage systems.

In this article, we’ve taught you how to create your own DIY interior basement drainage system using simple tools and materials.

By following our guide, not only will you be able to solve your drainage problems for good, but you’ll also be able to transform your basement into an organized and functional space.

So what are you waiting for? Get started!

Leave a Comment

Your email address will not be published. Required fields are marked *

Our social media

Scroll to Top